background image

6

Remove the provided RO membrane from the plastic packaging and install into the RO hous

-

ing on the main system bracket as follows:

I.  Open RO Housing:

 

See

 Fig. 4. 

Remove BLUE tubing lock clip and remove the tubing 

from the cap of the RO housing on the main system bracket.

**

 Using the provided 

small wrench, remove the RO housing cap by turning counter-clockwise.

II.  Install RO Membrane in Housing:

 

See

 

Fig. 5.

 

Insert the double banded end of the RO 

membrane into the RO housing first. 

III.  Close RO Housing: 

Hand twist the RO housing cap back onto the RO housing by turn

-

ing clockwise.

 

Using the provided small wrench, completely tighten the cap onto the 

RO housing. 

See

 

Fig. 6. 

Re-insert tubing into RO housing cap and re-attach BLUE tub

-

ing lock clip to secure tubing. 

Fig. 4

Fig. 5

Fig. 6

**Important!

The tubing connection on the membrane housing cap MUST be removed prior to opening the membrane housing to pre

-

vent the tubing connection elbow from breaking inside the housing cap. Refer to page 5 for Quick Connect Instructions.

RO Membrane Installation

Important!

Step 1: Remove Tubing

Summary of Contents for OROS-50

























Reviews: