KLD-30, KLD-22, & KLR-20
922502050
_0
9
_00
8
1
2
922502050
_0
9
_00
8
4
5
MAINS VOLTAGE
MAXIMUM POWER CONSUMPTION
BATTERY (Ni-Cd)
BATTERY PROTECTION
INDICATIONS
RECHARGING TIME
VIEWING DISTANCE
MINIMUM EMERGENCY DURATION
LIGHT SOURCE INTENSITY (230V / EMERG.)
DEGREES OF COVER PROTECTION
OPERATION TEMPERATURE RANGE
PRODUCED IN ACCORDANCE WITH
RELATIVE HUMIDITY
CONSTRUCTION MATERIALS
EXTERNAL DIMENSIONS
(
LXWXH)
GUARANTEE
KLD-30
KLD-30
KLD-22
KLD-22
KLR-20
KLR-20
LED Characteristics
Charge LED/ Test button
220-240V AC
/ 50-60Hz
3 hours
24
hours
22m
20m
30m
Overcharging and deep discharging protection
3.6V/1
Ah
3.2W / 3.4VA
EN 60598-1, EN 60598-2-22, EN 55015,
EN 61547, EN 61000-3-2, EN 61000-3-3
75lm/75lm
IP54
o
5 to 40 C
up to 95%
PC
,
Acrylic plate
PC
3 years (1 year for the battery)
Olympia Electronics S.A
.
45 °C max. across the board
11.2-13.2
V DC
0.72W
0405183
Built-in main board
Warranty
IP
54
Maintained
M
75
lm
Light output
3
h
Duration
30
m
22
m
20
m
KLD-22 & KLD-30
KLR-20
1
2
The light source of this luminary is not replaceable when the light source
reaches its end of life the whole luminary shall be replaced.
ATTENTION!!!
KLD-30
KLD-22
KLR-20
MAINTAINED
EMERGENCY
ILLUMINATION SIGNS
Thank you for your trust in our products
Olympia Electronics - European manufacturer
European
manufacturers
Technical Characteristics
MANUFACTURER
MODEL NUMBER
VOLTAGE RANGE
CONNECTIONS
NOMINAL POWER
TEMPERATURE (tc)
Olympia Electronics guarantees the quality, condition and operation of the goods. The
period of warranty is specified in the official catalogue of Olympia Electronics and also in
the technical leaflet, which accompanies each product. This warranty ceases to exist if
the buyer does not follow the technical instructions included in official documents given
by Olympia Electronics or if the buyer modifies the goods provided or has any repairs or
re-setting done by a third party, unless Olympia Electronics has fully agreed to them in
writing.
Products that have been damaged can be returned to the premises of our
company for repair or replacement, as long as the warranty period is valid.
Olympia Electronics reserves the right to repair or to replace the returned goods and to
or not
charge the buyer depending on the reason of defection. Olympia Electronics
reserves the right to charge or not the buyer the transportation cost.
NOTE:
LED=
Light Emitting Diode
LABELING EXPLANATION:
X:
Self contained
1:
Maintained
(*)
A:
Including test device
E:
With non-replacable lamp(s) and/or battery
G:
Internally illuminated safety sign
180:
3 hours duration
(*) Maintained operation: The luminary lights its illumination source, when it is
powered by the mains power supply or not
.
Non Maintained operation: The luminary lights its illumination source, only in
power supply’s failure.
Legend installation-replacement
72
nd
km
.
O
.
N
.
R
.
Thessaloniki-Katerini
P.C. 60300 P.O. Box 06 Εginio Pierias Greece
www.olympia-electronics.gr
TYPICAL WEIGHT
520gr.
920gr.
700gr.
254x
35
x170mm
254x35x180mm
310x
35
x216mm
