Olymp LavaSit DINER, Operating Instructions Manual

Page: 10 / 43

3
•
The massage function switches off automatically after 16 minutes. It can be restarted immediately
using button „Prog.“ (B).
•
The remote-control unit is secured magnetically to the button at back side of right-hand armrest.
(Fig. 4)
Important user information regarding the remote control unit :
The remote control of the shampoo unit is designed exclusively for the use of clients with
dry hands.
To guarantee correct operation of the electronic components, the remote control unit
must in no circumstances be allowed to come into contact with water, shampoo or other
fluids.
If it is operated with hands covered in foam, or with dirty hands, the remote control unit will not
operate correctly, there will be lasting damage to the electrical components, and the keys may become
permanently soiled.
The guarantee does not cover damage to the electronics as a result of the effects of
wetness!
If, in exceptional circumstances, stylists need to operate the remote control themselves, it is essential
that the plastic cover be used.
3. Base
The installations and corner valves are located in the base.
Note: We recommend fitting the feed pipes with an „Aqua-Stop” unit.
If the equipment is operated without an „Aqua-Stop“ the main tap must be closed after work is finished.
•
Take away the backside cover (V) from the base: (Fig. 1)
Hold the cover at the front edge on both sides, pull apart and remove to the rear.
•
Hang the backside cover onto the base:
Hold the cover at the front edge from both sides, pull apart and draw it from the rear side onto the
base: Front edge of cover must engage in perpendicular profile.
4. Accessories
•
Backrest cover (Fig. 5)
In order to protect the upholstery from soilings you can pull a backrest cover over the
backrest of the armchair as well as over the leg support.
•
Foot stool (Fig. 6)
The freely positionable leg rest makes possible that the customer can adopt a very relaxed
posture.
5. Variants of the power supply
a. Direct connection (230V/50Hz AC)
•
The massage motors are connected via a transformer/control unit with a power cable supplied
by the customer.
•
Connection to the power supply must be made only by a qualified electrician!
GB