b. RACK l\IOllNTING
EARS
For mounting RAC PAC in a standard 19" rack, special rack mounting ears
ca11
be delivered. Sizes are indicated below .
RAC PAC 150 and 300
RAC PAC 600 and 1000
88 mm
132 mm
Note that these rack mounting ears are part of the fan-kit mentioned above .
ORDERING INFORMATION
Rack mounting ears as per
RAC PAC 150 and 300
RAC PAC 600 and 1000
MOUNTING INSTRUC TIONS
Racflanges 88
Racflanges 132
Remove the silver-blue strips from the outside of the handles .
Screw the rack mounting ears into the 3 o r 5 holes o f the handle .
On RAC PAC 150 and 300 the rack mounting hole in the ear should be below
the centre line .
Remove the plastic feet by removing the two rear screws and pulling the feet
backwards out of the slot.
c.
REMOTE INDICATION
If it is desirable to indicate when RAC PAC switches from constant voltage
to constant current mode at remote, the Remote Indication option should be
installed.
It
consists of a relay: Haller 532 (24 V 13 mA)o
ORDERING INFORMATION
The Remote Indication option is ordered as per:
Remote Indication
This option is identical for all RACPAC models .
MOUNTING INSTRUC TIONS
Mount and solder the relay onto the main PC-board of RAC PAC
(
figure 18) .
Constant current condition is then indicated by contact closure between pins
A and I of the rear output connector.
21
