Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 19
C.
D.
32.
Assemble as shown in Illustrations
C
through
D
above. Attach Soffit Boards flush to end of
outside rafters with 2 - 1 1/4” screws per rafter end.
Important:
Drill pilot holes in Soffit ends to pre-
vent splitting. Measure and attach interior Rafters as illustrated on previous page. Measure and
attach remaining Soffit/Rafter connections using 2 - 1 1/4” screws per rafter/soffit.
Front Sof
fit
Rear Sof
fit
33.
Carefully flip completed Rafter Section over so Front Soffit is facing the front and place on
SpaceSaver walls.
Note:
Double check that your Rafter Section is positioned correctly by ensuring the
ends of the Rafters are sloped vertically as shown above.
Rafter ends vertical.
Side View
34.
Position completed Rafter Section on top of walls. Outside Rafters will sit on Extension Wall
framing and be positioned equally from side to side.
Rafter sits on framing
