Thank you for purchasing our 12x4 SpaceSaver Sliding Door Shed.
Please take the time to identify all the parts prior to assembly
.
1. Floor Section
Floors
1A:
2 - 45 ½” x 70 ¾” - Floor Frames
1B:
4 - 1 ½” x 3 ½” x 67 3/4” - Floor Joists
1C:
2 - 1 ½” x 3 ½” x 45 ½” - Floor Runners - Short
1CC:
5 - 1 ½” x 3 ½” x 47 ½” - Floor Runners - Long
1D:
2 - 5/8” x 45 3/8” x 70 5/8” - Plywood Floor
2. Wall Section
Main Wall Panels
2A:
5 - 45 ½” x 75” - Side/Rear Wall Panels
2B:
5 - 1 5/8” x 2 ½” x 45 ½” - Bottom Wall Plates - Side/Rear Walls
2BB:
2 - 1 5/8” x 2 ½” x 35” - Bottom Wall Plates - Front Walls
2C:
2 - 35” x 73” - Front Wall Panels
Door Headers
2D:
2 - 2” x 3 ½” x 26 ¼” - Door Headers - Short
2E:
1 - 2” x 3 ½” x 84” - Door Header - Long (88” Aluminum Strip Attached)
2EE:
1 - 1 ½” x 3” x 66 ½” - Interior Door Header
Extender Walls
2F:
2 - Top Triangular Siding Pc for Angle Wall Extenders
2G:
2 - 45 ¼” - Angle Wall Extenders - Left/Right
2H:
3 - 9” x 45 ½” - Wall Extenders
Wall Cleats
2I:
1 - ¾” x 3 ½” x 84” - Horizontal Wall Cleat - Long
2J:
2 - ¾” x 3 ½” x 26 ¼” - Horizontal Wall Cleats - Short
3. Rafter and Roof Section
Rafters
3A:
9 - 1 ½” x 2 ½” x 54” - Rafters
3B:
2 - 1” x 3 ½” x 48” - Front Soffits - Left/Right
3C:
1 - 1” x 3 ½” x 45 ½” - Front Soffit - Center
3D:
2 - ½” x 3 ½” x 48” - Rear Soffits - Left/Right
3E:
1 - ½” x 3 ½” x 45 ½” - Rear Soffit - Center
Roofs
3F:
2 - ¾” x ¾” x 51” - Facia Nailing Strips
3G:
2 - Roof Panels - 51” w x 56” d (1 - Left 1- Right)
3H:
1 - Roof Panel - 45 ½” w x 56” d (Center)
3I:
8 - 5 ½” Wide x 16” to 18” long - Filler Shingles
4. Trim & Miscellaneous Section
Bottom Skirting
4A:
5 - ¾” x 4 ½” x 45 ¼” - Side/Rear Bottom Skirting (Bevel Siding)
4B:
3 - ½” x 4” x 45 ¼” - Front Bottom Skirting
Filler Trim
4C:
4 - ½” x 2 ½” x 38” - Front Corner Filler Trims
4D:
4 - 7/8” x 2 ½” x 42” - Rear Corner Filler Trims
Door System
4E:
2 - Aluminum Door Tracks
4F:
2 - 36” x 73” - Sliding Doors
4G:
1 - ¾” x 3 ½” x 71 ½” - Interior Door Flange
4H:
2 - 1 ½” x 1 5/8” x 61 1/8” - Lower Door Track
4I:
3 - ¾” x 3 ½” x 44 ¼” - Lower Door Track Cover
4J:
3 - 1 ½” x 2 ¼” x 3 ½” - Sliding Door Track Stops
Note:
There are no Parts 4K or 4L
Outer Wall Trim
4M:
2 - ½” x 5 ½” x 78 ½” - Front Corner Trims
4N:
2 - ½ x 2 ½” x 80” - Side Front Corner Trims
4O:
2 - ½” x 5 ½” x 88 ¾” - Rear Corner Trims
4P:
4 - ½” x 2 ½” x 88 ¾” - Side Rear Corner & Middle Trims
14-15, 23
Steps
Steps
16-21
22
Steps
30-39
42-44
45-46
47-51
Steps
7-13
1-6
24-29
52-54
Parts List - Pages 2 and 3
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 4
Note: All Trim, Facia, and Bottom Skirting pieces will be positioned rough face out when installed.
