background image

Congratulations on assembling your 12x4 
SpaceSaver Shed with Sliding Doors!

Note: 

 Our Sheds are shipped as unfinished products.  If exposed to the elements, the western red 

cedar lumber will weather to a silvery-gray color. If you prefer to keep the cedar lumber looking  
closer to the original color, we suggest that you treat the wood with a good oil base wood stain.  You 
may also wish to paint your new shed rather than stain it.  In both cases we recommend that you  
consult with a paint and stain dealer in your area for their recommendations.

We  value  your  feedback  and 
would like to hear back from you 
on how well we are doing in the 
following areas: 
 

1. Customer Service 
2. On Time Shipping 
3. Motor Freight Delivery 
4. Quality of Materials 
5. Assembly Manual 
6. Overall Satisfaction.

Toll Line: 1.888.658.1658         |      Fax: 1.604.462.5333      |      [email protected]

The materials contained in this 
Assembly Manual may be downloaded 
or copied provided that ALL copies 
retain the copyright and any other  
proprietary notices contained on the 
materials. No material may be  
modified, edited or taken out of context 
such that its use creates a false or  
misleading statement or impression as 
to the positions, statements or actions.

Canadian Address 
9393 287th Street 
Maple Ridge, British Columbia 
Canada     V2W 1L1

United States Address 
P.O. Box 96 
Sumas, Washington 
USA    98295

Outdoor Living Today

Please call, write or email us at: 

We hope your experience  
assembling your 12x4 Slider 
Lean-To Storage Shed has 
been both positive and 
rewarding.

Page 37

Summary of Contents for SpaceSaver SS124-SLIDER-CEDAR-AK






































Reviews: