22.
Attach
2I & 2J - Horizontal Wall Cleats
to Wall Extender bot-
tom framing and Rear Wall top framing so that cleat is flush with
extender framing. There are two short cleats and one long cleat.
Alternate alignment of screws, so half screw into Wall Extender
Framing and half into Rear Wall Top Framing. Use
3 - 1 1/4” Screws
per short cleat and
6 - 1 1/4” Screws
on the long cleat.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 14
Parts
2I - Horizontal Wall Cleat - Long
(3/4” x 3 1/2” x 84”)
x 1
2J - Horizontal Wall Cleats - Short
(3/4” x 3 1/2” x 26 1/4”)
x 2
Hardware
S2 - 1 1/4” Screws
x 12 total
23.
To complete Wall Section
,
attach bottom 2x3 wall plates to plywood floor with
2 - 2 1/2” Screws
per wall section. Confirm Doorway opening is 66 1/2” wide. Prior to
securing, make sure wall panels are aligned correctly on the floor. Refer to
Step 9.
Wall
siding should overhang floor while 2x3 wall plates should sit flush with floor.
Hardware
S1 - 2 1/2” Screws
x 28 total
Bottom
Wall
Optional
- Caulking seams will help
prevent moisture from entering at
seam. Caulking not included in kit.
Pilot
Hole first.
Confirm Doorway opening is
66 1/2” wide at top and bottom.