Outdoor Living Today www.outdoorlivingtoday.com [email protected]
Page 9
16.
Place 1 - 3 1/2” x 3 1/2”x 75” long
Corner Post
in the rear corner and 2 Solid Wall Panels on
either side of Post. Align wall so outside of wall siding is flush with outside of the Post. Attach
together with
3 - 2 1/2” Screws.
Screw at the bottom, middle and top of stud into Post to secure
properly.
Bottom Wall Plate
15.
Starting with
Solid Wall Panels
, carefully lay panel face down. Position and attach
Wall Plate
to bottom of wall studs of each wall panel with
3 - 2 1/2” Screws.
Position so plates are flush with
framing.
Important:
Make sure all walls are
aligned in their upright position. If not ,water
may leak into your shed. Unsure if panel is
facing up or down? Check siding on window
wall panel to match alignment.
wall siding flush with
outside of Post
17.
Position second Solid Wall Corner Panel to Post and secure as per
Step 16. Important: Do
Not Attach Walls To Floor at this stage.
Post flush at
top with wall
framing.
Do Not Attach Walls To
Floor Until Step 35.
