Outdoor Living Today www.outdoorlivingtoday.com [email protected]
Page 4
Exploded view of all parts necessary to complete Floor Section. Identify all parts prior to
starting. Floor Footprint is 111” x 111” x 55 1/2 x 55 1/2” x 78 1/2”.
Large Plywood
Floor Piece (3)
Rectangular
Floor Section (6)
27 5/8” wide Plywood
Floor Piece (angle cut)
Triangular Floor
Frame Section
Triangular Plywood
Floor Piece
27 5/8” wide
Plywood Floor Piece
Floor Runner
(8 in total) See Parts
list for exact sizes
1.
Lay out 3
Long Floor Joists
(52 1/2”)
and 2
Floor Joist Plates
(27 3/4”) as illustrated above.
Position outside joists flush to end of Joist Plate. Position mid Joist equally on Joist Plate. Attach with
2 - 2 1/2” Screws
per end. Complete 6 Rectangular Floor Frame Sections.
2.
Lay out perimeter pieces for Triangular Floor Section. Attach in each corner with
2 - 2 1/2”
Screws.
When attached together, the perimeter will be 55 1/2” x 55 1/2” x 78 1/2”.
51 7/8”
53 3/8”
78 1/2”
A. Floor Section
Note: You can
find the Square
Drive Bit for the
screws in with the
Hardware Kit Bag.
