background image

Toll Free 1-888-658-1658         www.outdoorlivingtoday.com          [email protected]

9 ft Naramata Spa Shelter

Assembly Manual

Outdoor Living Today 

Thank you for purchasing a 
Naramata /Getaway Spa Shelter from 
Outdoor Living Today.  Please take
the time to identify all the parts 
prior to assembly.  

Safety Points and Other Considerations
Our products are built for use based on 
proper installation and normal residential use, 
on level ground. Please follow the 
instruction manual when building your 
shelter and retain the manual for 
future maintenance purposes.

Some of the safety and usage measures you may wish to consider include:
-snow load ratings vary by geographical location. If heavy or wet snowfall 

occurs, it is  advisable to sweep the snow off the roof(s). 

-if the product is elevated, any structural and building code requirements are 

solely the customer's  responsibility, and should be abided by. 

-in high or gusty wind conditions it is advisable to keep the structure securely grounded. 
-have a regular maintenance plan to ensure screws, doors, windows and parts are tight. 

Customers agree to hold Outdoor Living Today and any Authorized Dealers free of any liability for
improper installation, maintenance and repair of any Outdoor Living Today products.

In the event of a missing or broken piece, simply call the Outdoor Living Today
Customer Support Line @ 1-888-658-1658 within 30 days of the delivery of your 
purchase. It is our commitment to you to courier replacement parts, free of charge, 
within 10 business days of this notification. Replacement parts will not be 
provided free of charge after the 30 day grace period. 

Version #8

Feb 20th, 2015

Summary of Contents for Naramata



















Reviews: