background image

Page 18

Congratulations on building your 9x9 Naramata Spa Shelter!

Note;

Our Spa Shelters are shipped as an unfinished product.  If exposed to the elements, the 

western red cedar lumber will weather to a silvery-gray color. If you prefer to keep the cedar lumber
looking closer to the original color, we suggest that you treat the wood with a good oil base wood
stain.  You may also wish to paint your new shed rather than stain it.  In both cases we recommend
that you consult with a paint and stain dealer in your area for their recommendations.

We hope your experience assembling the Naramata Spa Shelter has been both positive and rewarding.

We value your feedback and would like to hear back from you on how well we are doing in the 
following areas:

1. Customer Service
2. On Time Shipping
3. Motor Freight Delivery
4. Quality of Materials
5. Assembly Manual
6. Overall Satisfaction.

Please call, write or email us at: 

Canadian Address
9393 287th Street
Maple Ridge, British Columbia
Canada     V2W 1L1

United States Address
P.O. Box 96
Sumas, Washington
USA 98295

Outdoor Living Today

Toll Line: 1.888.658.1658         |      Fax: 1.604.462.5333      |      [email protected]

The  materials  contained  in  this
Assembly  Manual  may  be  downloaded
or  copied  provided  that  ALL copies
retain  the  copyright  and  any  other 
proprietary  notices  contained  on  the
materials.  No  material  may  be 
modified, edited or taken out of context
such  that  its  use  creates  a  false  or 
misleading  statement  or  impression  as
to the positions, statements or actions.

Summary of Contents for Naramata



















Reviews: