background image

Version #10 

May 12, 2021

 
 
 
 
Thank you for purchasing 
a 6x6 Maximizer Storage Shed.  
Please take the time to identify  
all the parts prior to assembly.   
 
 
 

 
 
 
 
 
 
 
Safety Points and Other Considerations 
Our products are built for use based on 
proper installation and normal residential 
use, on level ground. Please follow the  
instruction manual when building your  
shed and retain the manual for future  
maintenance purposes. 
 
Some of the safety and usage measures you may wish to consider include: 
 
-snow load ratings vary by geographical location. If heavy or wet snowfall occurs, it is advisable to sweep the 
snow off the roof(s).  
-if the product is elevated, any structural and building code requirements are solely the customer's  
responsibility, and should be abided by.  
-in high or gusty wind conditions it is advisable to keep the structure securely grounded.  
-have a regular maintenance plan to ensure screws, doors, windows and parts are tight.  

 
Customer agrees to hold Outdoor Living Manufacturing Ltd. and any Authorized Dealers 
free of any liability for improper installation, maintenance and repair.

1-888-658-1658                        www.outdoorlivingtoday.com            [email protected]

Page 1

In the event of a missing or broken piece, simply call the Outdoor Living Today 
Customer Support Line @ 1-888-658-1658 within 30 days of the delivery of your  
purchase. It is our commitment to you to courier replacement parts, free of charge,  
within 10 business days of this notification. Replacement parts will not be  
provided free of charge after the 30 day grace period. 

6x6 Maximizer Storage Shed 

Assembly Manual  

Architectural Knotty with Cedar Roof 

Summary of Contents for Maximizer
































Reviews: