35.
With Rafter Section correctly aligned, secure rafters to walls using
90° Metal Brackets
. Start with
outside rafters and secure 2 Brackets with
4 - 1 1/4” Screws
per bracket. Screw into Wall Extension
Framing at the front, and Wall Panel top framing at the rear. Complete both sides.
90° Metal Brackets
36.
With outside rafters properly secured, completely secure remaining interior rafters using
8 - 2 1/2” Screws
. Screw into rafters from inside of Extension Wall framing at front of shed and inside
Rear Wall framing at rear of shed, behind Horizontal Wall Cleats.
Front
37.
Position first row of
Roof Battens (
3/4” thick x 3
1/2” wide x 50” long x 2 )
on front of roof rafters. Place
flush with rafter end. Batten
will sit on evenly on center
rafters overhanging 2” on the
outside rafters.
Attach batten with 1 - 1 1/4”
screw per each rafter. Pre-
drill with 1/8” drill bit first to
prevent end from splitting.
Complete attachments of
both 50” long roof battens.
Center Rafters
Flush with
rafter end.
Overhanging
2” on outside
rafter.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 20
