Batten Spacers
38.
Place
Batten Spacers
(2 pcs x 3/4” x 1 1/2” x 21 1/2”)
below each end of the attached
Batten
,
lengthwise along outside
Rafter
. Ensure
Batten Spacer
is tight with
Batten
. Attach
Batten Spacer
to
Rafter
using
2 - 1/4” screws
(4 total)
39.
Locate middle row of
Roof Battens ( 2 pcs x 3/4” thick x 3 1/2” wide x 50” long)
and
attach flush with previously attached
Batten Spacers
via the same method as
Step 37
. Attach a
second row of
Batten Spacers
flush with the bottom edge of this middle
Batten
row via the
same method as
Step 38
.
40.
Locate lower row of
Roof Battens ( 2 pcs x 3/4” thick x 3 1/2” wide x 50” long)
and
attach flush with previously attached
Batten Spacers
via the same method as
Step 37
, using a
total of
6 - 1 1/4” screws
.
Important:
Pre-drill pilot hole with 1/8” drill bit first to prevent Batten Spacer from splitting.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 21
