21.
Align wall framing of Angled Wall Extendor and Side Wall so they are flush at the front. The
siding for both walls should also align evenly from front to back.
22.
With Angled Wall Extendor and Side Wall aligned correctly, secure together from the inside with
4 - 2 1/2” Screws
.
20.
Locate an
Angled Wall Extendor
and
Top Siding Piece for Angled Wall Extendor (L/R)
.
Position top siding on wall extendor and align as shown above. Attach with
3 - 1 1/2” Finishing Nails
to top wall framing. There are left/right top siding pieces. Use rough surface side out.
Place finished wall extendor on side wall panel frame. Complete both sides now.
Note:
Bottom siding of wall extendor will overhang and cover siding of side wall.
Wall framings
flush.
Siding
lines up.
5 1/2”
5 1/2”
Top Siding Pc.
Sidings will
overlap.
Top Siding Pc. for Angle Wall
can also be installed after Roof
is attached after Step 48.
x
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 13
