Trim dado
sits in flange.
Pre-drill 1/4”
deep with 1/8” drill
bit for all door
hardware.
Dab
caulk in siding
channel on both
sides of window.
Run
caulk in siding
gap at top.
Requires a large
amount.
71.
Locate
Window Insert
. Before installing, dab caulk in siding channel on both sides of window
opening. This will prevent water from getting in behind window. Position window in cavity and secure
with
8 - 1 1/4” Screws
. Caulk gap between siding and window at top. This requires a large amount
of caulking but is important to fill. Later, Window Trims will be installed to hide caulking.
72.
Position
Window Trim
around window doing a dry run first and attach with
4 - 1 1/2” Finishing
Nails
per piece. Window trim has a small dado on reverse face. Outside flange of window will roughly
sit in the dado to give a better fit.
73.
Attach
Door Handles
and
Black Hasp
as shown above. Handles and Hasp mounted with
3/4” Black Screws
.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 35
