OLT Garden Chalet Assembly Manual Download Page 5 | Manualshive

Page: 5 / 19

OLT Garden Chalet Assembly Manual Download Page 5

Front

4.

Locate

Left Angled

Side Wall (2A)

. Position on floor

as illustrated above. Have helper hold wall while wall is
screwed down to floor with

2 - 2 1/2” Screws (C)

Important -

confirm alignment before attaching.

Rear

Wall framing flush
with Floor Frame
at front.

At rear, a gap

will exist

.

Optional

- Caulking

seams will help prevent
moisture from entering
at seam.

Caulking not

included in kit.

Side W

all

Rear W

all

5.

Align

Rear Wall (2D)

flush to floor at the back. Wall frames will be offset by approximately 5/8”

when walls aligned correctly.

Optional -

Caulking wall seams will help prevent moisture from

entering at seam.

Caulking not included in Kit.

Butt of siding even
with wall framing.

Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]

Page 5

Front

Bottom of wall siding will sit

flush with outside of floor.

Bottom of rear wall siding will

sit flush with outside of floor.

wall framing

Siding Butt

Wall frames will be offset by approximately
5/8” when walls aligned correctly.

«
...
3
4
5
6
7
...
»

Summary of Contents for Garden Chalet




















Reviews:

No comments