3.
Lay out both completed
Floor
Frames
as illustrated.
2.
When correctly positioned, attach each joist with
4 - 2 1/2” screws (Part B)
- 2 per end. Complete
Joist attachments for 2nd Floor Frame.
4.
Align Floor Frames together as shown below. Screw sections together with 8 - 2 1/2” screws
(Part B)
.
Alternate screw location. Use a wood clamp to keep frames together while screwing.
5.
When completed, your floor footprint
should be 70” wide x 75” deep.
You can find the
Square Drive Bit
(Part A) for the
screws in with the
Hardware Kit Bag.
Front 70”
Door goes
on 70” side
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 8
