![background image](http://html1.mh-extra.com/html/olt/12x12-sunshed/12x12-sunshed_assembly-manual_732224031.webp)
73.
Attach
Narrow Wall Trims
around the Sunshed. Narrow trims are used where wall panels come
together and leave a seam.
Note:
the Narrow Trim on the Short Wall side is only 79” long. Attach
with 8 - 1 1/2” finishing nails per piece.
74.
Locate all
Ridge Caps
for Polygal (3 Mid / 2 Outside / 2 Center). Starting from the
outsides, position both 5 1/2” wide caps so the long edge with the pre-attached facia cleat is aligned
with plywood of roof, and Cap end slides against roof. When correctly aligned, attach Caps to center
of outside rafter with 4 finishing nails. Use a straight edge to align Cap with Roof Plywood.
See below.
Mid (3)
2 1/2” wide
Outside (2)
5 1/2” wide
Center (2)
3 1/2” wide
Cap overhangs rafter
end by approx 1”.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 31