![background image](http://html1.mh-extra.com/html/olt/12x12-space-maker-garden-shed-with-plywood-roof-and-ak-siding/12x12-space-maker-garden-shed-with-plywood-roof-and-ak-siding_assembly-manual_732221026.webp)
39.
With both
Rafter Sections
correctly aligned, secure
Gable Framing
to
both outside
Rafters
with
8 - 2” screws
per side at top and with
8 - 2” screws
into
Top Wall Plates
at bottom.
Hardware (Steps 39)
S3
- 2” Screws
x 32 total
Front
Rear
Important:
If Gable framing does not line up with Rafters, remove temporary 2”
screws from Gable framing. Re align gable and then secure.
40.
Start by attaching one
Gusset
onto the mid-
dle
Rafters
as illustrated. Attach only
1 - 2” screw
per side now.
Important:
Pilot hole
Gussets
to
prevent splitting.
Parts (Steps 40 - 41)
Gussets
(3/4” x 80” x 19 3/4”)
x 3
Hardware (Steps 40 - 41)
S3
- 2” Screws
x 36
total
Front
Gusset sit 1/4” below
Rafter.
Important:
Before attaching remaining Gussets, recheck the inside-to-inside wall measure-
ments are done as in
Step 37
. Use a level to check they are square.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 26