OLT 12x12 Space Maker Garden Shed with Plywood Roof & AK Siding Assembly Manual Download | Manualshive

Page: 1 / 42

background image

12x12 Space Maker Garden Shed

with Plywood Roof & AK Siding

Assembly Manual

Revision #1.0

Aug 17, 2021

Outdoor Living Today www.outdoorlivingtoday.com [email protected]

Page 1

Safety Points and Other Considerations
Our products are built for use based on
proper installation and normal residential
use, on level ground. Please follow the
instruction manual when building your
shed and retain the manual for future
maintenance purposes.

Thank you for purchasing a
12x12 SpaceMaker Garden
Shed from Outdoor Living
Today. Please take the time
to identify all the parts prior
to assembly.

Important Information:

- It is the sole responsibility of the customer to check with your local municipal or county by-laws before
ordering this product to confirm it complies with building codes in your area.

- If the product is elevated, any structural and building code requirements are solely the customer's
responsibility, and should be abided by.

- Customer agrees to hold Outdoor Living Today free of any liability for improper installation, maintenance and
repair of any of our products.

- Snow load ratings vary by geographical location. If heavy or wet snowfall occurs, it is advisable to sweep the
snow off the roof(s).

- In high or gusty wind conditions it is advisable to keep the structure securely grounded.

- Have a regular maintenance plan to ensure screws, doors, windows and parts are tight.

- In the event of a missing or broken piece, call the Outdoor Living Today Customer Support Line
@ 1-888-658-1658 within 30 days of the delivery of your purchase. It is our commitment to you to courier
replacement parts, free of charge, within 10 business days of this notification. Replacement parts will not be
provided free of charge after the 30 day grace period.

- All structures purchased from Outdoor Living Today are covered for a period of one year for defects in manu-
facturing and workmanship. Costs incurred for customer installations are not included.

- Failure to use supplied parts included in this kit could result in poor product performance and may void your
warranty. Please contact Outdoor Living Today’s Customer Toll Free Line if you plan to deviate from our written
instructions.

Roof Area:

160 sqft

1
2
3
...
»

Summary of Contents for 12x12 Space Maker Garden Shed with Plywood Roof & AK Siding











































Reviews:

No comments

Related manuals for 12x12 Space Maker Garden Shed with Plywood Roof & AK Siding

Brand: Palmako Pages: 33

Brand: Luoman Pages: 44

Brand: Outdoor Life Group Pages: 24

Brand: Outdoor Life Pages: 29

Brand: ABSCO SHEDS Pages: 25

Brand: Palmako Pages: 27

Brand: Palmako Pages: 30

Brand: Palmako Pages: 44

Brand: Naterial Pages: 4

Brand: GARDY SHELTER Pages: 118

Brand: Konifera Pages: 115

Brand: Karibu Pages: 42

Brand: Palmako Pages: 54

Brand: Palmako Pages: 62

Brand: Karibu Pages: 27

Brand: Karibu Pages: 37

Brand: Karibu Pages: 57

Brand: Karibu Pages: 49

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands