16.
Carefully slide Joist notches of Ladder Section
onto Girder. Try to align notches so they fall into place
all at once. With notches of Ladder Section all sitting
correctly on Girder, slide Section approximately 7” from
Post. Check alignment of opposite end of Ladder
Section.
Notch slides onto Girder
7”
5 1/2”
Joist should sit
flush against Post.
17.
Set remaining Ladder Sections in
place for side. Ladder Section adjacent to
Middle Post should sit flush against Post.
Equally space Middle Ladder Sections.
18.
With all Ladder Sections in place,
check once more for equal spacing. When
satisfied with Ladder Section positioning,
attach to Girders with 4 - 4” screws per
Ladder. Screw from top edge of Joist down
into Girder.
Pilot hole screws first to help with screwing. Pilot Hole Joist
first and secure
with 4” screws/
Ladder Section.
5 1/2”
Equally Space
Middle Ladder
Sections.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 9
