Post
Hardware
Lift, position and attach the
second Post/ Girder
section to post hardware.
Deep Notch facing down.
Girders to outside
2.
Lift up a completed
Post/Girder Section slowly and
carefully. Make sure B-Girders
are facing outward.
3.
If Post Mount Hardware is
installed, position bottom of Posts in
Hardware.
4.
Secure Post to Post Hardware with appropriate
hardware such as lag bolts or a sufficient number
of screws.(
Hardware Not Supplied)
Lag Screws
(not included)
5.
Locate
Girder (C)
and lift into
position between
both B-Girders. The
C-Girder has a deep
notch facing down on
each end.
Important:
you will need the
help of 2-3 people while lifting
and positioning the completed
Post/Side Girder Sections into
place.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 5
