background image

Page 2

For technical questions, please call 1-888-866-5797.

Item 58468 

        

Specifications

Compatible Gasses

Argon, CO

2

, or Argon/CO

mix

Maximum Inlet Pressure 3000 psig
Flow Range

0-60 SCFH

IMPORTANT SAFETY INFORMATION

Installation Precautions

1.  DANGER!  DO NOT CONNECT TO ACETYLENE 

CYLINDER.  This Regulator can allow pressures 
that can cause acetylene to explode.

2.  Assemble only according to these instructions.  

Improper assembly can create hazards.

3.  Wear ANSI-approved safety goggles and 

heavy-duty work gloves during assembly.

4.  Keep assembly area clean and well lit.

5.  Keep bystanders out of the area during assembly.

6.  Do not assemble when tired or when under the 

influence of alcohol, drugs or medication.

7.  Do not use oil or grease on any gas connection.

8.  Only use included adapter.  Do not use 

an adapter to attach this Regulator to 
any gas other than those listed.

9.  Do not attach gas at a pressure above the 

Maximum Inlet Pressure listed above.

Operation Precautions

1.  This product is not a toy.  Do not allow 

children to play with or near this item.

2.  Use as intended only.

3.  Inspect before every use; do not use 

if parts are loose or damaged.

4.  Maintain product labels and nameplates.  

These carry important safety information.  
If unreadable or missing, contact 
1-888-866-5797 at Harbor Freight Tools 
or [email protected] 
for a replacement.

Cylinder Safety

Cylinders can explode when damaged.

1. 

Do not weld on a pressurized or closed cylinder.

2. 

Do not allow an electrode holder, 
electrode, welding torch, or welding 
wire to touch the cylinder.

3. 

Keep cylinders away from any electrical circuits, 
including welding circuits.

4. 

Keep protective cap in place over the valve 
except when the cylinder is in use.

5. 

Use only correct gas shielding equipment 
designed specifically for the type of welding 
you will do.  

Maintain this equipment properly.

6. 

Protect gas cylinders from heat, being struck, 
physical damage, slag, flames, sparks, and arcs.

7. 

Use proper procedures to move cylinders.

8. 

Do not stand in front of Regulator 
when opening cylinder valve.

Summary of Contents for 58468

Page 1: ...rence 21a When unpacking make sure that the product is intact and undamaged If any parts are missing or broken please call 1 888 866 5797 as soon as possible Copyright 2020 by Harbor Freight Tools All rights reserved No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools Diagrams within this manua...

Page 2: ... Pressure listed above Operation Precautions 1 This product is not a toy Do not allow children to play with or near this item 2 Use as intended only 3 Inspect before every use do not use if parts are loose or damaged 4 Maintain product labels and nameplates These carry important safety information If unreadable or missing contact 1 888 866 5797 at Harbor Freight Tools or productsupport harborfreig...

Page 3: ...ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document including all text under subheadings therein before set up or use of this product 1 Check that the gas line and welding system are completely set up and all connections are tight 2 Check that the Regulator is securely fastened to the shielding gas cylinder and the Knob on the Regulator is backed off fully 3 Open the valv...

Page 4: ...sequential damages so the above limitation of exclusion may not apply to you THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS To take advantage of this warranty the product or part must be returned to us with transportation charges prepaid Proof of purchase date and an explanation of the complaint must accompany t...

Reviews: