23
Cladding
●
The cladding may not be overheated, as cracks
could appear.
●
Use a maximum of 3 kg wood for heating.
●
As the natural cladding comes from a „grown“ boul-
der, structure and colour scheme may be very dif-
ferent.
●
The surface may be altered under temperature in-
fluence.
Special information
The manufacturer’s guarantee expires if the stove is
significantly or permanently overloaded above the
nominal heating output, or if fuels other than those list-
ed are used.
●
The stove must only be used with the combustion
chamber door shut.
● Never remove hot ashes. Only store ashes in a fire
-
proof, non-combustible container.
●
Attention:
The surfaces get hot! Always use the en
-
closed glove when operating the stove.
●
Convection air openings may not be covered.
● Never use white spirit, benzene or other inflamma
-
ble, hazardous materials to ignite the fire.
● The combustion air supply fittings must never be al
-
tered. In particular, it must be ensured that any nec-
essary combustion air pies are open while the fire
-
place is being used.
● Do not make any changes or modifications to the
stove.
Cleaning
What?
How often?
Using what?
inside of stove
at least 1 x per year
hand brush, vacuum cleaner
connection piece
at least 1 x per year
hand brush, vacuum cleaner
glass panel
as required
when cold
using glass cleaner for stoves- and oven glasses
painted surfaces
as required
when cold
with a slightly damp microfibre cloth
Water pipes
The water pipes in the upper combustion chamber
should be cleaned on a regular basis. The cleaning in-
terval will depend on the level of soiling.
● Remove the deflector plate from the combustion
chamber.
● Unscrew the insulating flap above the combustion
chamber opening (2 wing nut, Fig. 5).
●
Unscrew the inspection hatch (6 nuts).
●
The device should be cleaned using the wire brush
provided.