8
Electronic Oven Controller OEC
Instruction
Page 8 - 13
Table of contents
•
Foreword ............................................... Page 8
•
Installation ..................................................... 8-10
•
Operation ..................................................... 10-13
•
Power Failure.................................................... 13
•
Fault Indications.............................................. 13
•
What happens if? ........................................... 13
Foreword
This electronic oven controller OEC is a top product
of modern firing technology.
In the OEC, the combustion air supply is automati-
cally controlled during the entire combustion cycle.
Through the shut-off of the combustion air supply at
the end of the combustion cycle, heat losses are
avoided during chimney stove downtime.
High operating comfort, low emissions and high fuel
utilisation characterise the mode of operation of the
OEC.
Proper installation as well as correct handling and
care are vital to trouble-free operation and a long life.
Therefore, please follow all the instructions in this
manual.
Keep this manual on hand so that you can always
consult it as to correct operation at the beginning of
the heating period.
If you discover any transport damage, please report
this to your supplier immediately; otherwise there can
be no settlement claims free of charge.
Instructionslines
•
Local building regulations
•
The OEC must be connected and put into opera-
tion by a qualified professional.
Installation
Delivery Contents
Install the components on the chimney
stove in the following installation steps.
•
Screw the motor retaining clip with the spacer
sleeve in the wood storage compartment on the
motor console.
Motor retaining clip
Spacer sleeve
GB
