14
Combustion air slide valve
Operating lever for combustion air supply
●
Operating lever on “0”
:
all slide valves closed
●
Operating lever on “I”
:
Secondary air slide valve completely open /
Primary air slide valve completely closed
●
Operating lever on “II”:
Secondary air slide valve completely open /
Primary air slide valve completely open
Regulation of combustion air
Position of operating lever:
“II” .....................Ignition position, max. heat output
“I” .....................Nominal heat output with billet wood
“I” .....................Nominal heat output with wood briquettes
“0” ....................Obtain glow
●
As the secondary air also contributes to the cleanliness
of the glass pane, the operating lever should be set on
“I” minimum. This also applies in the event of low-load
operation.
●
When not operating the lever should be set on “0”, to re-
duce the cooling down of the room.
Fire rust
Control lever for the fire rust
•
The control lever can be used to set up the grate and
move the ash out of the firebox by sliding the grate
back and forth into the ash box.
•
Primary air can only enter the firebox when the grate
is in the open position.
Wood storage
press
here
The wood storage below the combustion chamber is
equipped with a magnetic pressure lock. It can be opened
by lightly pressing the button. The closure is also done by
pressing lightly.
