15
● Push the temperature sensor into the sensor pocket
on the right side of the stove and screw tight with the
sensor sleeve and the union nut.
Temperature sensor
Sensor sleeve Union nut
● Connect the sensor cable to the back of the unit
down to the wood storage compartment.
● Push the cable of the power supply through the
grommet in the back panel at the bottom.
● Pull the power supply cable and sensor cable through
the recesses in the metal cover into the wood stor-
age compartment.
Power supply cable Sensor cable
● Push the room temperature sensor (RT-Fühler)
from inside through the wood storage compartment
through the grommet on the left in the back panel.
Room temperature sensor
● Slide the room temperature sensor out about 10 mm
to the outside through the grommet and screw tight-
ly with the union nut.
Room temperature sensor Union nut