34
Air flow direction adjustment procedure
Up/down direction can be adjusted by using the AIRFLOW button on the remote controller.
This button,each time pressed,changes the mode in the following sequence:
Up/down direction can be adjusted by using the AIRFLOW button on the remote controller.
This button,each time pressed,changes the mode in the following sequence:
Adjusting air flow direction
NOTE
When the room temperature controller(thermostat)trips in the heating mode or when the defrosting operation is conducted,the blow flap changes automatically to the
When the room temperature controller(thermostat)trips in the heating mode or when the defrosting operation is conducted,the blow flap changes automatically to the
horizontal position.
horizontal position.
When the heating operation has just started and the room temperature is still low,it may take a little time before the flap moves to the above sway operation angle.
When the heating operation has just started and the room temperature is still low,it may take a little time before the flap moves to the above sway operation angle.
The flap may stop at the tilted down-blow position during the"Sway operation"in the heating mode,
The flap may stop at the tilted down-blow position during the"Sway operation"in the heating mode,
AUTO
push the LOUVER button,changes the mode to swing louver.
Push the button,to stop swing.
push the LOUVER button,changes the mode to swing louver.
Push the button,to stop swing.
About TIMER operation
About Amenity reservation
Amenity reservation funcition is provided to start the operation a little earlier
Amenity reservation funcition is provided to start the operation a little earlier
so that the room temperature is near the optimum temperature at the timer ON
so that the room temperature is near the optimum temperature at the timer ON
time in case of starting the operation by TIMER ON/OFF.
time in case of starting the operation by TIMER ON/OFF.
Mechanism
Mechanism
Checking of the room temperature
Checking of the room temperature
starts 60 minutes ahead of the timer
starts 60 minutes ahead of the timer
ON time.Depending on the tempera-
ON time.Depending on the tempera-
ture at that time,operation starts 5 to
ture at that time,operation starts 5 to
60 minutes ahead of the timer ON time.
60 minutes ahead of the timer ON time.
Amenity reservation is the function
Amenity reservation is the function
only for COOL and HEAT operation
only for COOL and HEAT operation
mode (including AUTO).It does not
mode (including AUTO).It does not
actuate in DRY mode.
actuate in DRY mode.
About SLEEP Operation
About SLEEP Operation
When the SLEEP operation is selected,the room temperature is auto-
matically controlled with elapsed time so that the room isn't too cool
during cooling or too warm during heating.
During cooling and dry:Present temperature is raised 1 in an hour
(when the timer is set),and 2 raise in two hours.Then the temperature
dosen't change ever.
During heating:Present temperature is lowered 1 in an hour (when the
timer is set),and 2
lower in two hours.Then the temperature dosen't
change ever.
In cool operation
In cool operation
Set
Temperature
Set
Temperature
Check the room
temp. 60 min
ahead
Check the room
temp. 60 min
ahead
Set time
Set time
(Operation)
(Operation)
(Stop) Operation starts
(Stop) Operation starts
About FAN SPEED
Capacity of the air conditioner can be selected by your choice.During heating or cooling.
Capacity of the air conditioner can be selected by your choice.During heating or cooling.
Operation capacity by your choice
Operation capacity by your choice
Set automatically by microcomputer
Set automatically by microcomputer
Powerful operation with high capaci y
Powerful operation with high capaci y
Standard operation
Standard operation
FAN SPEED
FAN SPEED
AUTO
AUTO
HI
HI
MED
MED
Energy-saving operation
Lo
About power-off memory function
When the air conditioner disconnect the power suddenly, restart it, the air conditioner operates at the mode
it did before power suddenly failed.
The wire controll don t have this function
Summary of Contents for OSH-T24HRK3
Page 37: ......
