3-8
Sending Faxes > Methods For Entering the Destination
3
Select transmission settings.
Select [
Detail
].
Sub address communication, encrypted transmission, transmission start speed and ECM can
be set.
4
Select [OK].
Entry of the destination finishes.
Key
Description
Sub Address
Set this to transmit using a Sub Address.
Sub Address Transmission (page 5-26)
TX Start Speed
This is set to change the transmission start speed. Select the speed from
33,600 bps, 14,400 bps, and 9,600 bps.
NOTE
Normally this should be used with the default setting.
ECM
ECM is a communication mode specified by the ITU-T (International
Telecommunication Union) that retransmits data when an error occurs.
Fax machines that have ECM mode check for errors as they
communicate, preventing distortion of the image due to noise on the line
and other conditions.
Encrypted
Transmission
This is set when using encrypted transmission to send the data.
The fax will be deleted. (page 5-37)
NOTE
When
On
is selected in
Entry Check for New Dest.
, a confirmation screen is displayed for
the entered FAX number. Re-enter the same FAX number and select [
OK
].
Machine’s
Operation Guide
Select [
FAX Entry
] to enter the next fax number.
Broadcast Transmission (page 3-14)
If [Broadcast] is set to [Prohibit], it is not possible to enter multiple destinations.
Machine’s
Operation Guide
In addition to a fax, you can include e-mail transmission and folder (SMB/FTP) transmission
to send as one job.
Machine’s
Operation Guide
When
is displayed, you can register entered contents to the Address Book.
