background image

Upgrading The Computer

6 - 4 Upgrading the HDD

6

Upgrading the HDD

The hard disk drive can be taken out to accommodate other 2.5" serial (SATA)
HDDs with a height of 9.5mm (h) and a speed of 

5400 RPM

 or lower. Follow

your operating system’s installation instructions, and install all necessary drivers
and utilities (see 

“Driver Installation” on page 4 - 2

), when setting up a new

hard disk.

Hard Disk Removals

1.

Turn 

off

 the computer, and remove the battery.

2.

Locate the hard disk bay cover and remove screw 

.

3.

Slide the hard disk assembly in the direction of the arrow 

.

HDD System 

Warning

New HDDs are blank. Be-
fore you begin make sure:
You have backed up any
data you want to keep from
your old drive.
You have all the CDs/DVDs
required to install your op-
erating system and pro-
grams.
If you have access to the in-
ternet, download the latest
application and hardware
driver updates for the oper-
ating system you plan to in-
stall. Copy these to a
removable medium.

1

2

Summary of Contents for OLIBOOKM1020







































































































Reviews:

Related manuals for OLIBOOKM1020