Olivetti OLIBOOKM1020 Page 5 User Manual Download

Page: 5 / 102

III

Preface

Instructions for Care and Operation

The notebook computer is quite rugged, but it can be damaged. To prevent this, follow these suggestions:

Don’t drop it, or expose it to shock.

If the computer falls, the case and the components could be damaged.

Keep it dry, and don’t overheat it.

Keep the computer and power supply away from any kind of heating ele-

ment. This is an electrical appliance. If water or any other liquid gets into it, the computer could be badly damaged.

Avoid interference.

Keep the computer away from high capacity transformers, electric motors, and other strong

magnetic fields. These can hinder proper performance and damage your data.

Do not expose the computer to
any shock or vibration.

Do not place it on an unstable
surface.

Do not place anything heavy on
the computer.

Do not expose it to excessive
heat or direct sunlight.

Do not leave it in a place where
foreign matter or moisture may
affect the system.

Don’t use or store the com-
puter in a humid environment.

Do not place the computer on
any surface that will block the
Vents/Fan Intakes.

Summary of Contents for OLIBOOKM1020







































































































Search results

Summary of Contents for OLIBOOKM1020

Reviews:

Related manuals for OLIBOOKM1020

Brands by name

Popular brands

Olivetti OLIBOOKM1020, User Manual

Search results

Summary of Contents for OLIBOOKM1020

Reviews:

Related manuals for OLIBOOKM1020

Brands by name

Popular brands