16
T
O
DELETE
THE
MESSAGE
OR
MEMO
YOU
ARE
LISTENING
TO
1.
To start listening to the messages or memos, press the key:
The display shows:
PLAY MSG 01 03
30-03-04 10:47
2.
To delete the message you are listening, press the key:
The TAD moves to the next message and the display shows:
PLAY MSG 01 02
30-03-04 10 :47
3.
To delete the next message, press the key:
Proceed in the same way for all the messages you want to
delete.
note
If you do not want to delete any messages, press the
key.
T
O
DELETE
ALL
MESSAGES
ALREADY
PLAYED
Let's suppose there are 6 messages on the TAD of which 3
have already been played back:
1.
Press the key:
The display shows:
DELETE OLD MSG?
CANCEL/
2.
To delete the messages you have already heard, press the
key:
The display shows the initial stand-by status and the number
of messages remaining after deletion. In this case, 3.
notE
If you do not want to delete any messages, press the
key.
T
O
TRANSFER
MESSAGES
AND
MEMOS
TO
A
REMOTE
TELEPHONE
If you wish,
you can program the TAD to call you on a
remote telephone
at a given time to let you know that
there are new messages on the telephone answering de-
vice.
In addition to the time and number at which you wish to be
called,
you can program
the way in which
the transfer
is
to be made (
once only or once a day
).
1.
Press the key
until the display shows:
TAD SET-UP
2.
To confirm the setting, press the key:
The display shows:
ICM ON SPEAKER
3.
Press the key
until the display shows:
FORWARD MESSAGES
4.
To confirm the setting, press the key:
The display shows:
FORWARDING OFF
5.
To view the other two options available: "FORWARD.ONE
TIME" or "FORWARD. DAILY", press the keys:
/
6.
To confirm your choice, press the key:
The display shows:
TYPE TIME
HH:MM
7.
Type the time at which you want the messages to be trans-
ferred, for example: "11:45". To do this, press the keys:
-
8.
To confirm the setting, press the key:
The display shows:
TYPE TEL. NUMBER
9.
Type the telephone number where you want to be called,
for example: "02 614456". To do this, press the keys:
-
10.
To confirm the setting, press the key:
The display shows:
REC.FORW.ANNOUNC
At this point, you may proceed to record the transfer mes-
sage (see "
To record the transfer message
") or abort
the procedure by pressing the
key.
note
The message transfer setting is
cancelled by a power failure
.
Summary of Contents for Fax-Lab S120
