3.9
REMOVAL O THE I/O BOARD
To remove the I/O board proceed as follows:
•
Remove the supporting base, the rear cover and the rear housing as described previously.
•
Disconnect the 100-pin connector
A
and power supply connector
B
.
•
Back off the three screws
C
.
•
Back off the ten screws
D
.
•
Remove the I/O board.
B
A
C
Figure 3-16
D
D
D
D
D
Figure 3-17
For reassembly, reverse the above procedure.
3-10
XZAC3274
