Olivetti d-color MF451, Manual

Page: 35 / 71

d-Color MF 651/551/451 (Version 2) 3-11
3.2 Configuring the basic settings 3
3.2.5 Finishing
Various settings can be selected for sorting and finishing copies fed into the copy output tray.
0 The "Staple" setting is available only if the optional finisher is installed.
0 The "Punch" setting is available only if the punch kit is installed on the optional finisher.
0 The Half Fold and Center Staple & Fold settings are available only when the saddle stitcher is installed
on the optional finisher.
0 The Tri-Fold setting is available only if the saddle stitcher SD-508 is installed on the optional finisher
FS-526.
0 The Z-Fold setting is available only if the Z-folding unit is installed on the optional finisher FS-526.
0 "Staple" cannot be used together with "Offset".
0 "Half-Fold", "Center Staple & Fold" and "Tri-Fold" cannot be used together with any of "Offset",
"Staple" and "Punch".
%
Press [Basic] ö [Finishing].
<When the finisher, punch kit, or saddle stitcher is installed>
Reference
- The displayed window varies depending on the installed options.
Original Direction When scanning double-sided originals or configuring double-sided or
combined copy settings, specify the direction of the original to be loaded.
For details, refer to page 3-17.
Original Binding Pos. When you have selected "2 > 1" or "2 > 2", enter the original binding posi-
tion. For details, refer to page 3-15.
Output Bind Direction When you have selected "1 > 2" or "2 > 2", enter the copy binding position.
This can arrange the images in the front page and back page in the correct
orientation.
•
[Auto]:
The copy binding position is automatically set either at the top or at the
left. A copy binding position along the long side of the paper is selected
if the original length is 11-11/16 in (297 mm) or less. A copy binding po-
sition along the short side of the paper is selected if the original length
exceeds 11-11/16 in (297 mm).
Main Screen Press this button to return to the basic settings screen with the changed
settings applied.
Settings