Olivetti d-color MF451, Manual

Page: 14 / 71

Control panel and functions 2
2-4 d-Color MF 651/551/451 (Version 2)
2.1
4 [Power Save] Press this key to enter Power Save mode.
While the machine is in Power Save mode,
the indicator on the [Power Save] key lights
up in green and the touch panel goes off. To
exit from Power Save mode, press the [Pow-
er Save] key again. -
5 [Mode Memory] Press this key to recall registered fax/scan
settings. p. 2-8
6 [Utility/Counter] Press this key to display the Utility screen
and the Meter Count screen. p. 2-7
7 [Reset] Press this key to reset all settings (except
programmed settings) entered using the
control panel and touch panel. p. 2-6
8 [Interrupt] This key is not used in the enlarge display
mode. -
9 [Stop] Pressing this key while copying, scanning or
printing temporarily stops the operation. p. 2-6
10 [Proof Copy] Press this key to print a single proof copy to
be checked before printing a large number
of copies. p. 2-13
11 [Start] Press to start the copy, scan or fax opera-
tion. p. 2-6
12 Data indicator Flashes in blue while a print job is being re-
ceived. Lights up in blue when a print job is
queued to be printed or while it is being
printed. The indicator lights up in blue when
there is saved fax data or unprinted fax data. -
13 [C] (clear) Press this key to clear a value (such as the
number of copies and a zoom ratio) entered
using the keypad. p. 2-12
14 Keypad Use the keypad to enter the number of cop-
ies, zoom ratio, and a fax number. -
15 [Guidance] This key is not used in the enlarge display
mode. -
16 [Enlarge Display] Press this key to switch between the en-
larged display screen and the standard size
screen. While authentication is performed by
Authentication Manager, the screen will not
be switched to the enlarged display screen. p. 2-11
17 [Accessibility] Press this key to display the screen for con-
figuring settings for user accessibility func-
tion. p. 2-9
18 [Access] If user authentication or account track is en-
abled, press this key after entering the user
name and password (for user authentication)
or the account name and password (for ac-
count track) in order to use this machine. p. 2-11
19 [Brightness] dial Use this dial to adjust the brightness of the
touch panel. -
20 [User Box] This key is not used in the enlarge display
mode. -
21 [Fax/Scan] Press this key to enter Fax/Scan mode.
While the machine is in Fax/Scan mode, the
indicator on the [Fax/Scan] key lights up in
green. p. 2-6
22 [Copy] Press this key to enter Copy mode. (As a de-
fault, the machine is in Copy mode. ) While
the machine is in Copy mode, the indicator
on the [Copy] key lights up in green. p. 2-6
Overview Reference