Olivetti 9017, Manual, Page: 21 / 38

1 6
OPERA OPERA
OPERA OPERA OPERATTTTTOR TROUBLESHOO
OR TROUBLESHOO
OR TROUBLESHOO OR TROUBLESHOO OR TROUBLESHOOTING
TING
TING TING TING
Faults not caused by the machine malfunctioning may occur, particularly during the initial phase. The following
guidelines will help you to solve certain problems and to avoid wasting time.
The machine does not make copies
Check that:
•
The power cable is plugged into the socket correctly (both the mains socket and the socket on the machine)
•
The POWER SWITCH (B4) is in the I position (ON)
•
The FRONT COVER (B15) is closed properly.
The copies are completely blank
Check that:
•
The original is on the platen glass
•
The photocopier is not indicating operating faults.
If paper jams occur frequently
Clean the stack charge eliminator (
☞
p. 18).
If copies are marked in the same place
If marks occur in the same place on all copies, clean the platen glass and the cover (
☞
p. 17).
If copies are too light or too dark
If, having checked that the EXPOSURE LEVER (A15) is set to the right (darker copies) or to the left (lighter copies),
the copies are still too light or dark, this is probably due to an incorrect exposure system adjustment.
To adjust exposure, open the front panel, turn the SETTING DE-
VICE (C7) anticlockwise to obtain darker copies, clockwise to obtain
lighter copies.
MESSAGES MESSAGES MESSAGES MESSAGES MESSAGES