Olivetti 9017, Manual, Page: 15 / 38

1 0 COPYING COPYING
COPYING COPYING
COPYING
COPYING ON SPECIAL MEDIA COPYING ON SPECIAL MEDIA
COPYING ON SPECIAL MEDIA COPYING ON SPECIAL MEDIA
COPYING ON SPECIAL MEDIA
It is possible to make copies on special media such as transparencies, cards, headed paper and adhesive labels.
For the procedure
☞
«Using the stack bypass», p. 8.
• For the feeding direction of the special media, follow the instructions on their packaging.
MAKING TWO-SIDED COPIES MAKING TWO-SIDED COPIES
MAKING TWO-SIDED COPIES MAKING TWO-SIDED COPIES
MAKING TWO-SIDED COPIES
Copying in two-sided mode means making copies which bear two pages of original, one on each side.
Follow the procedure shown in the drawing below.
1. Position the first original on the platen glass and proceed with copying in the normal way.
2. Make the copy of the first original.
3. Place the second original as shown in the figure (still with the side to be copied facing downwards, but with the
top margin the opposite way round to the first). Position the copy of the first original in the stack bypass (B5) with
the copied side facing downwards and the top margin facing outwards.
4. Copy the second original from the manual feed (
☞
«Using the stack bypass», p. 8), thus obtaining a two-sided
copy.
!
For this type of copying, the weight of the paper must be between 60 and 128 g/m
2
inclusive.
COPY EXIT AREA PAPER FEED AREA PLATEN GLASS