6
COPYING
COPYING
COPYING
COPYING
COPYING
COPYING
COPYING
COPYING
COPYING
COPYING
The operating procedure is very simple. The name of the keys and their reference numbers are listed
in «Control panel», p. 4. The control panel figure is found on inside of the cover.
When an operation is in process or a mode is selected, the indicator lights up.
Vice versa it is switched off when the function is deactivated.
ST
ST
ST
ST
START
ART
ART
ART
ART-UP
-UP
-UP
-UP
-UP
!
Make sure that the power plug is correctly inserted in the mains socket.
Set the POWER SWITCH (B4) in the position I (ON). The
LED of the power switch lights up and the LED of the START
key (A28) flashes (green). The copier is ready for settings
and the print command.
Once the warm-up is over, the LED of the START key (A28)
remains lit (green) and the copy procedure is automatically carried
out.
Standard setting
Start key:
Activated
Exposure:
Automatic
Copy ratio:
Direct (100%)
Paper feed:
Automatic from cassette
Number of copies:
1
PLACEMENT OF THE ORIGINAL
PLACEMENT OF THE ORIGINAL
PLACEMENT OF THE ORIGINAL
PLACEMENT OF THE ORIGINAL
PLACEMENT OF THE ORIGINAL
Lift the cover and place the original face down on the platen
glass. Make sure that the top left-hand corner of the document
lying face down corresponds with the V symbol marked on the
top left-hand corner of the glass.
Gently lower the glass platen cover.
• If the copier does not contain the required size, use the stack
bypass (
☞
p. 8) or adjust the cassette to the desired paper size
(
☞
«Adapting the cassette to a different paper size»), p. 11.