732-N Front Load Slicer
0732S20005
4-1
OPERATING INSTRUCTIONS
WARNING
ALWAYS USE CARE WHENEVER WORKING NEAR THE CUTTING KNIVES.
To operate the slicer, stand in front of the machine and grasp the lever with your right
hand. Pull the lever all the way down and hold it in that position. Using your left hand
load the product into the machine.
WARNING
NEVER START THE MACHINE BEFOE LOADING THE PRODUCT.
Make sure that the product does not hang over either edge of the cradle. While holding
the lever completely forward, (the machine will not start unless this is done), push the
Green “Start” button with your left hand.
After starting the machine restrain the hand lever slightly allowing it to return slowly until
the knives have contacted
AND
penetrated the crust on the product. At this point allow
the lever to return at its own speed.
CAUTION
NEVER PUSH THE HAND LEVER.
PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor