HP-11P 7
you give in regards to the operation of the machine are approved, correct, safe, and clearly
understood.
WARNING
：
Additional Safety Instructions for Bandsaw
1. Do not operate with dull or badly worn blades. Dull blades require more demand on the motor and are
less likely to cut precisely. Inspect blades before each use.
2. Never position fingers or thumbs in line with the cut. Serious personal injury could occur.
3. Do not operate this bandsaw without wheel guards, pulley guards, and blade guards in place.
4. When replacing blades, make sure the teeth face toward the front of the saw.
5. Cuts should always be fully supported against the side of the conveyor table and by the pressure rollers.
6. Do not back workpiece away from the blade while the saw is running. If you need to back the work out,
stop the bandsaw and wait for the blade to stop. Do not twist or put excessive stress on blade while
backing work away.
7. Blade should be running at full speed before beginning a cut.
8. Always feed stock evenly and smoothly. Do not change conveyor speeds during a cut.
9. This machine is not designed to cut metal or other material except wood.
10. Do not manually stop or slow blade after turning the saw off. Allow it to come to a complete stop
before you leave it unattended.
11. All inspections, adjustments, and maintenance must be done with the power off and the circuit breaker
shut off. Wait for all moving parts to come to a complete stop.
12. Habits – good and bad – are hard to break. Develop good habits in your shop and safety will become
second- nature to you.
13. If at any time you are experiencing difficulties performing the intended operation, stop using the
bandsaw. Then contact our service department or ask a qualified expert how the operation should be
performed.
14. Make sure blade is properly tensioned before operating machine.
15. Keep loose clothing and long hair away from moving conveyors!
WARNING
：
Like all power tools, there is danger associated with the Model HP-11P. Accidents are frequently caused
by lack of familiarity or failure to pay attention. Use this tool with respect and caution to lessen the
possibility of operator injury. If normal safety precautions are overlooked or ignored, serious personal
injury may occur.
CAUTION
：
No list of safety guidelines can be complete. Every shop environment is different. Always consider safety
first, as it applies to your individual working conditions. Use this and other machinery with caution and
respect. Failure to do so could result in serious personal injury, damage to equipment, or poor work
results.
