For planer table operations, the fast forward and fast backward keys have the same
function as the forward and backward keys.
When the forward key is pressed, the planer table moves down. (This is also achieved
using the “Table Down” push button on the planer).
When the back ward key is pressed, the planer table moves up. (This is also achieved
using the “Table Up push button on the planer).
In Manual Mode, the planer table moves as long as a key is pressed and held. When the
key is released, the table stops.
This mode can be used for manual positioning, or adjusting procedures.
SINGLE MODE
In single mode, the device performs automatic positioning of the table to the programmed
target position. The “Table Up” or “Table Down” button on the planer should be pushed
and held; when the table has fully adjusted to the target position, the table will
automatically stop in position. Release the push button.
Setting Target Value
Step 1: Press
(Target window LED Starts blinking)
PROG
Step 2: Enter the target value using numerical keypad.
Step 3: Press
to complete.
LED lamp starts blinking – the device is ready to start
the positioning.
START
