Oliver 4430, Owner'S Manual, Page: 24 / 65

24 | Page Oliver Machinery 4430 Planer
Installing Extension Tables
1. Attach the extension table to the planer with the provided mounting bolts (#5 in “Inventory”). Do not
fully tighten the bolts yet. Just make sure it is tight enough to hold the extension table in place. Then
hand thread the set screws into the extension table.
2. Align the edge of extension tables with the edge of the planer bed. Make sure the edges are flush with
each other.
3. Use a straight edge to check if the extension tables are in parallel with the planer bed. At this point
the extension table should be slightly sagged.
CAUTION
Each extension table weighs 29 lbs. and it can be difficult to install by one person.
Get assistance to install the extension tables when needed.