Oliver Packaging & Equipment Company
y
3236 Wilson Drive NW, Walker, MI 49534
(800)
2
53-3893
4
-
3
Remove zip-ties securing
handle to base and l
ift
h
andle
Handle shown in the
upright position
Plug power cord in
to
appropriate voltage wall
socket
At this time, m
odels without
a switch have a red light on
the electrical box that
will
illuminate
, indicating
the
machine is powered on
Install tray carrier
using the
locating pins in the tray
carrier and holes in the frame
as shown
Install film roll in back of
unit
Pull the film from the top
of the roll towards the front
of the unit
Placing it between the two
white guide rollers
Pull the film from the top
of
the roll
Lift up the black film pinch
roller and slid
e
the film
under it as shown
Place a tray in the tray
carrier
Pull the film forward ¼”
beyond edge of tray
For models with a switch
,
install power cord plug as
shown
For models with a switch
, press
the red light on the switch to power
on the machine. The red light will
illuminate, indicating the machine
is powered on
Allow 15 minutes for the heater
platen to heat up to temperature
