1308S20019
7-2
CLEANING AND MAINTENANCE CONTINUED
CLEANING PROCEDURE
- MACHINE FRAME AND BASE
NOTE:
SEE HEATER PLATEN AND FILM CUTTER CLEANING SECTIONS FOR SPECIFIC GUIDANCE
ON THEIR CLEANING PROCEDURES
1.
Unplug the unit and allow one hour for cooling.
2.
Remove tray carrier.
3.
W
ipe down
tray carrier
with a standard cleaning
solution.
4.
Use a sanitizing solution to spray and wipe down the rest of the unit.
5.
Replace tray carrier
.
CLEANING PROCEDURE - FILM CUTTER BLADE
1. Unplug the unit and allow one hour for cooling.
2. Lift handle up to its resting position.
3.
Use a damp cloth with sanitizing solution to wipe off any access food particles
located on the back of the cutter blade.
CAUTION
THE CUTTER BLADE IS SHARP. USE A PROTECTIVE GLOVE TO DO THIS
CLEA
NIN
G OPERATION. FAILURE TO DO SO MAY RESULT IN SERIOUS INJURY.
Oliver Packaging & Equipment Company
y
3236 Wilson Drive NW, Walker, MI 49534
(800)
2
53-3893
CLEANING PROCEDURE -
HEATER PLATEN
1.
For ease of cleaning, machine may be left on when cleaning heater platen.
USE
HAND PROTECTION AND
CAUTION AS PLATEN WILL BE HOT.
2.
With
ONLY
water
, use a balled up damp cloth
to
wipe down
the
surface of
platen
to remove any food
residue or debris.
3.
DO NOT SCRAPE THE SURFACE OF THE PLATEN WITH SHARP
OBJECTS AND AVOID THE USE OF METAL TOOLS.
4.
The use of plastic or soft-metal scouring pads such as SCOTCH BRITE™ or
CHORE BOY®
may be used as
a safe and effective means of cleaning the
platen. Be sure to wipe all surfaces with a sanitizing agent after cleaning.
