26 |
Page
Oliver Machinery
10060/10061 Drill Press
Set Spindle Speed
Consider the following when setting the speed
before drilling:
1.
The size of the drill bit.
2.
Type of cutter.
3.
Material hardness and other properties.
4.
Feed rate and other factors
Please refer to the guidelines from the
manufacturer of the cutting tool for setting the
optimum spindle speed. In general, use higher
spindle speed for small cutters and soft materials,
and vice versa.
See section “Changing Speed” on page 28 for
details.
Adjust Laser Center Finder
Laser center finder is useful for drilling multiple
holes with the same setting.
1.
Using a small bit (1/16” or less), drill a hole
in a scrap piece of wood the same thickness
as your workpiece.
2.
Turn on the laser and adjust the laser source
so the crosshair intersects the hole center.
The laser is now adjusted for operation.
3.
If you change the table height or thickness of
your workpiece, readjust the center finder
for the next set of holes.
WARNING
DO NOT stare into the laser beam, or view
it directly with an optical instrument. Laser
can cause permanent and serious eye
injury.
Summary of Contents for 10060
