10060/10061 Drill Press
OLIVERMACHINERY.NET
27
|
Page
Adjusting Drill Press
Table Adjustments
These are the components for adjusting the position of the table:
Table Height and Swing Position Adjustment
1.
Loosen the column lock lever.
2.
Use the table height crank to adjust the
table’s height.
3.
Align the center hole in the table to drill bit
position to avoid drilling into the table.
4.
Tighten the column lock lever after
adjustments.
Table Rotation Position Adjustment
1.
Loosen the table lock lever.
2.
Rotate the table to the desired position.
3.
Tighten the table lock lever after
adjustments.
Table Tilt Adjustment
1.
Loosen table tilt lock bolt.
2.
If the table is set at 0°. Make sure the
centering set screw is backed out before
changing the table tilt angle.
3.
Adjust the table tilt angle using the tilt scale
as shown in the picture below.
4.
When moving the table back to the normal
drilling position (0°), thread in the center set
screw.
5.
Tighten the table tilt lock bolt after
adjustments.
Summary of Contents for 10060
