Oliver 10014, Owner'S Manual

Page: 28 / 65

28 |
Page Oliver Machinery 10014 Planer
Digital Readout (DRO)
The Wixey DRO allows operators to measure the
depth of the cut with 1/32” resolution.
•
Press the
ON/OFF
button to turn on/off the
DRO.
•
Press the MM/IN button to toggle measuring
unit between metric (mm) and US standard
(inch). The fraction inch value will appear if
the measurement is a multiple of 1/32”
•
Press the ABS/INC button to toggle between
absolute measuring mode and incremental
mode.
•
Value in INC mode will be reset when
switching to ABS mode.
•
To reset the reading to zero in ABS mode,
hold the ON/OFF button
Feed Rate Control
10014 Planer can feed stock at 16/20 FPM (feet-per-minute). To change feed rate, shift the position of
the feed rate control knob when the machine is running at full speed with no load:
• Push in: 20 FPM
• Pull out: 16 FPM
• In between: 0 FPM (Neutral)
IMPORTANT
Only change feed rate when the machine is running at full speed. Failure to do so
may cause the gearbox to jam and damage the machine.