
8
System Connections
Precaution:
Do not turn on the power of the player before all connections have been correctly done.
Important remark:
The diagram maybe different from your DVD PLAYER, the connections are only for your
reference.
Connecting to TV
The Video output connector of the player include: Video output, S-video output, Y/PbCb/PrCr output,
component output and VGA output. You may select any of them to connect, refer to your connecting apparatus
correspondingly.
Setup DVD Player Video output mode
- Setup your DVD player video output mode as per specification of your TV system. Press the P/N button on
remote control to select the same mode as TV system mode such as ”PAL/Auto/NTSC”.
For example: if the TV system is NTSC mode, press the P/N button to setup the player under “NTSC” mode.
- Setup the player video output display size refer to the screen size of the connected TV, set the “TV TYPE”
to “16:9” in system setup menu when wide screen TV connected, when connected to normal TV, set the
player’s TV TYPE to “4:3 PS” or “4:3 LB”.
S-Video connection setting
Connect the S-Video output jack on the DVD Player to the Display device’s S-video input jack with a S-video
cable. Under this mode, there is no need to do the setting in the setup menu.
Y/Cb/Cr video connection setting
Connect the Y/Cb/Cr output jack on the DVD Player to the Display device’s Y/Cb/Cr input jack with Y/Cb/Cr
cable. Press
Ǐ
VIDEO
ǐ
button to shift the video output to YUV interlace signal output mode. Shift the TV input
mode to Y/Cb/Cr.
Y/Pb/Pr video connection setting
Connect the Y/Pb/Pr output jack on the DVD Player to the Display device’s Y/Pb/Pr input jack with Y/Pb/Pr
cable. Press the
Ǐ
VIDEO
ǐ
button to shift the Player’s video output to YUV Progressive signal output. Then shift
the TV input to the relevant mode. press the
Ǐ
VIDEO
ǐ
button, the screen will switch from interlace to
progressive output mode. Continue to press the button to scroll through available options.